Last Updated on April 27, 2023 by Tabraiz
What is an AC unit?
Removal of heat from a confined space for increased interior comfort is known as air conditioning. It can be done using a mechanical ‘air conditioner’ or using other methods like passive cooling, ventilative cooling etc.
AC units are used for heating and cooling and can be in various shapes and sizes ranging from small vehicles to massive buildings.
Installing an AC unit is a tough process to embark on your own, so there are professionals who can help you do so. This article, however, doesn’t discuss the process of installing the unit as much as it does the things to do before the installation. After discussing a few essential things to get done before the installation, we will talk about Air Conditioning Repair, Orange County and Air Conditioning Service, Orange County, CA.
7 Essential things to do before getting a new AC unit installed.
This part of the article deals with things to do before getting an AC unit installed; it talks about 7 essential things to be dealt with before getting a new AC unit and why these things are important.
The installation Area:
Window ACs or indoor units of Split ACs shouldn’t be facing windows or doors directly because the cold air leakage possibility increases. Never place the outside unit of a split air conditioner in direct sunlight since this might cause the unit to overheat and impair the appliance’s overall efficiency.So, make sure that the location is scrutinized before starting the process.
Inspect the drain pipes:
The water from poorly installed drain pipes can leak into the unit and damage it. Any ordinary leaks in the drain pipe can also cause the efficiency of the AC to lessen. So, it is important to make sure that there is no leakage in the pipes and that they are all intact.
Copper pipes alignment:
If the copper pipes are bent or broken or poorly installed, refrigerant leakage can occur more frequently. This can reduce the cooling efficiency. Therefore, when it comes to air conditioning repair, Orange County, APEX heating and air conditioning does an excellent job at installing AC units.
The calibration of the AC should be correct:
Freon gas is pre-filled in the latest ACs, so make sure that the calibration of this is absolutely correct during installation.
Clean the ducts:
Contractors installing ACs can’t do so if the ducts are filled with dust. So, it is important to clean your ducts thoroughly and air them out before resealing them and before the installation begins.
Review the system before installation:
Check your new system to verify if it is the correct one that you want installed at your home. Make sure that the AC unit matches your order to prevent problems, especially concerns related to the space taken by the AC.
Make room for the AC:
This is probably understood and is common sense, but that doesn’t make it any less important to mention. Before the new unit arrives, clear off the obstacles around so that the professionals have space to install the unit. Make sure that the measurements are perfect for the AC. Also, clear off any pathway obstacles like chairs, toys, rugs etc. to reduce the chance of damage to the property and accidents while working on installation.
Air conditioning Service, Orange County, Ca.
Before concluding the article, we will discuss a few places of air conditioning service, Orange County. First in the list of places for air conditioning repair, Orange County, is Orange County Plumbing, Heating and Air Conditioning; they deliver first class service and use updated and efficient equipment for all repairs.
Another name in the list of contractors for air conditioning service, Orange County, Ca, is Saddleback Plumbing, heating and Air. They acknowledge the importance of proper working AC systems and have been professional AC contractors for more than 30 years now.
The last in this list is ALL PRO AIR. It is a company that employs high trained professionals to provide the best service in Orange County. They specialize in designing, engineering and installing AC units and always have a bright attitude. If a mistake is made anywhere, they do everything they can to get it fixed for you without any hassle.
They are very upfront about the cost of service and provide lengthy explanations and details about the appliance and also tell you if there are any limitations or better options you could refer to. They also have an exclusive written guarantee of their work.
Maintaining your AC unit.
Now that you’re aware of a few great places to go to for installing or servicing your AC unit, there are also a few things you can do for maintenance.
- Get the air filter cleaned and washed regularly to avoid any collection of dust and dirt.
- Clean the coils of the AC so that they don’t get insulated with dust particles which can reduce the ability of the AC to absorb heat.
- The conditioner unit fan cools down the refrigerant gas, so it is important for it to function properly. If you hear some noises coming out of your AC, it is important to get a professional to check the blades for chips and cracks and to examine the heaviness of the motor.
- Get the condensate drain inspected because if it is clogged, it won’t allow for drainage to pass.
- Finally, it goes without saying that maintaining your AC won’t just save you money on electricity, but it will also prevent breakdown of equipment. Make sure that your AC unit undergoes thorough, regular checks from experts to use the AC in its full efficiency and to avoid any disastrous events.
Conclusion
Other than the stated things to do before installing a new AC unit, there are also more basic, ground rules like what is the size that you need, what is your budget, why you should get an energy efficient AC unit etc.; these questions also play a role in deciding which AC unit you will purchase.
There is no AC which is one size fits all, so each house will have a different AC more suited for it. However, there are things that you should remember while purchasing an AC unit like buying the right type and size, installing the outdoor unit of a split AC in a shady place, checking the energy efficiency rate, choosing inverter technology ACs, choosing units which make less noise and most importantly, getting it installed by a certified professional.
